Slurry Pump Rubber Impeller

Slurry Pump Rubber Impeller Feature:
1. centrifugal slurry pumps and spare parts can fully interchange with world famous brand.

2. These pumps are of heavy-duty construction, designed for continuous pumping of highly abrasive and corrosive slurries.

3. They feature a wide choice of replaceable abrasion resistant metal or moulded elastomer casting liners and Impellers, which are all interchangeable within a common casting assembly.

4. Wear -resistant Metal Liner and Rubber Liner available

5.Seal Type: gland Seal , Expeller Seal and Meachnical seal

6.Can be installed in multistage series

7. Can be positioned at intervals of 45 degree.

8. easy to maintenance

Slurry Pump Rubber Impeller  

Application:

Centrifugal mining slurry pump are widely used in mining, power, metallurgy, coal, deading, building material and other industrial lines to pump concentrate, tailings, sludge and other abrasive, high density slurries.
Minerals Flotation Processing
Electric Factory Coal Preparation
Coal Washing
Chemical Medium Processing
Effluent Handling
Sand And Gravel Handling

For more information about sump pump replacement parts,we can supply you.

pump spare parts manufacturer

pump spare parts manufacturer Specifications
concrete pump rubber  hose
1 Material: natural rubber, steel wire
2 Length : 3-9m
3 Hose end: glvanized or painting

ype	working pressure(bar)	burst pressure(bar)	ply
3"	80	140	2
4"	80	140	2
5"	80	140	2
3"	105	160	4
4"	105	160	4
5"	105	160	4

pump spare parts manufacturer 

Note:1 .Our hose is the best fabirc hose made,The length is 3m-10m

         2 Available with Metric or Heavy Duty ends and available with one or two ends.

            Our hoses ends are heat treated and externally awaged for long life.

          3.  We may also make according to your requirement.

we produce submersible pump fittings,if you need,pls contact us.

submersible slurry pump spare parts

submersible slurry pump spare parts Features :

1.SP (R) type submerged pumps are vertical centrifugal slurry pump, generally into the pool or pit to
work,used to transport abrasive, coarse particle, high concentration slurry.
2. Don't need any shaft seal and shaft seal water, in the inhaled volume insufficient conditions  they
can also work normally.
3.SP (R) type submerged pumps' pump body is made of wear-resisting metal. Impeller is made of
wear-resistant metal or rubber, polyurethane SP (R) type submerged pumps parts into the liquid with
rubber lining,they are all applicable to transport corrosive slurry.

The rugged SP/SPR Heavy Duty Sump Pumps are available in a wide range of popular sizes to suit most pumping applications. Thousands of these pumps are proving their reliability and efficiency worldwide in:

• Minerals processing

• Coal preparation

• Chemical processing

• Effluent handling

• Sand and gravel

and almost every other tank, pit or hole-in-the-ground slurry handling situation.

we are slurry pump parts suppliers,you can email us.

rubber pump parts suppliers

we are rubber pump parts suppliers,if you need our products,pls leave us messages.
1.Slurry pump parts-completely interchangeable with L,M,HH,SP slurry pumps and G/GH gravel pumps . For unlisted slurry pump parts, OEM service offered. Drawing needed.
2.Material-High chrome alloy: a05,a07,a49, etc     
                Natural rubber:r08,r26,r33,r55,etc
                other material as per requests,like stainless steel,duplex stainless steel, nickle alloy,alloy 20,etc.
3.OEM part codes-Here we list some OEM part code for reference:
     Impeller:127,147,145,etc,such asC2127,D3147,E4147,F6147,G8147,G10147,FAM1247...

 bonded rubber piston
Our bonded rubber pistons have no joint leaks. Abrasion of abrasive fluid between pistons
liner. Rubber structure is particularly resistant to chemical and oil-based drilling mud
Change the aniline point.
The company is located in:
 Piston replacement
We offer a full range of piston replacements including piston hubs, plates, snap rings and renewable energy
Rubber.

we also produce slurry pump parts suppliers,you can contact us.

slurry pump parts suppliers

we are slurry pump parts suppliers,welcome to contact us.
FBU Slurry Pump Seals are rugged in construction, designed specifically for use in heavy
duty slurry pumps, mixers and other rotating equipment throughout slurry processing industries:
• Ore Recovery
• Flue Gas Desulfurization (FGD)
• Phosphate Slurry
• Tailings Disposal
• Coal Slurry Transportation
• Wet Cement Processing
• Bauxite & Iron Ore Slurries
• Sand & Gravel
• Dewatering Systems
• Effluent Transport
• Waste Sludge Removal

slurry pump parts suppliers

Operating Conditions: Seat Compability Materials:

Pressure: ≤25 Bar
Temperature: 40℃~300℃
Speed: ≤ 25 m/s
Standard Face: Carbon,SiC, SSiC, TC
Seat: SiC, SSiC, TCSecondary Sealing: EPDM, Viton,Kalrez,Chemraz
Spring:Hast.C276
Metal: 316SS

we produce submersible pump fittings,welocme to contact us.

pump spare parts manufacturer

hongcheng are pump spare parts manufacturer,I think we can help you.
The concrete pump S-tube valve is a crucial component in the pumping system. It is used in combination with the wear plate and wear ring. 
The valve is pivotable mounted inside a concrete hopper. It alternately connects one of two outley ends od thepumping cylinders to the inlet end of the dischage conduit which was mounted on the fromt wall of the hopper.

pump spare parts manufacturer 

How about your parts quality ?
 
     A. 1). All raw material we used are environmental-friendly;
         2). Skilful workers care every details in handling the producing and packing processes;
         3). Quality Control Department specially responsible for quality checking in each process.

we produce impeller pump suppliers in china,you can email us.

about sump pump parts and accessories

if you need sump pump parts and accessories,we can supply you.
What is your company specialized in?
A:Auto parts plastic injection mold making
Medicinal parts mold making
Home appliance part mold making
Industry parts mold making

about sump pump parts and accessories 

Why should we choose you?
A:We have 18 years experience in the business of all kinds of mould making. Good quality,reasonable lower price,fast delivery are also our advantage.
And we have a complete production line: processing center, big-sized NC milling machine, NC milling & drilling machine, diverse NC turning machine.
We also have a professional team for mold desige about ODM or OEM.

we produce replaceable slurry pump spare parts,pls leave us messages.

looking for slurry pump parts

we produce slurry pump parts,welcome to contact us,we can supply you cheap price.
The shaft seals forms of the series of the pumps can be adoptable of gland seal,centrifugal seal and mechanical seal.The discharge pipes can be positioned at intervals of 45 degree by request and oriented to any eight position to suit installation and applications.
The capacity of the pump can reach 3600m3/h, the head of the pump can reach 80 m. The discharge pipe can reach 16 inches.

looking for slurry pump parts  

The pump parts can be made of high chrome, a wide variety of elastomers or the latest in ceramic materials for longer service life and higher efficiency.

Materials Offered:
-High Chrome Cast Iron
-Ductile Iron
-Stainless Steel
-Natural Rubber
-Specific Rubber
-Polyurethane

we also slurry pump parts suppliers,you can email us.

sump pump replacement parts

we produce sump pump replacement parts,welcome to contact us.
High effiency anti-abbrasive slurry pump spare parts
Brief introductions
Shijiazhuang Boda Industrial Pump Co., Ltd. Is the specialized manufactuer of slurry pumps in Shijiazhuang, China. Our products cover Slurry pump, Sand/Gravel pump, vertical slurry pump, froth pump and slurry pump spare parts.

Description of products
1. The slurry pump spare parts are made of high chromium alloy which has superior wear and corrosive resistance.
2. Non-Standard slurry pump spare parts & Different size available.

sump pump replacement parts

Main applications of slurry pump spare parts
This kind of slurry pump spare parts are mainly used in for handling abrasive, high density slurries in the metallurgical, mining, coal, power, building material and other industrial departments.

we produce sump pump replacement parts,if you need our products,pls contact us.

sump pump replacement parts price

About sump pump replacement parts,welcome to contact us.we can supply you cheap price.
Factory of slurry pump, sand gravel pump , dredging pump and OEM Service
 Feature:

1. centrifugal slurry pumps and spare parts can fully interchange with world famous brand.
2. These pumps are of heavy-duty construction, designed for continuous pumping of highly abrasive and corrosive slurries.
3. They feature a wide choice of replaceable abrasion resistant metal or moulded elastomer casting liners and Impellers, which are all interchangeable within a common casting assembly.

4. Wear -resistant Metal Liner and Rubber Liner available

5.Seal Type: gland Seal , Expeller Seal and Meachnical seal

6.Can be installed in multistage series

7. Can be positioned at intervals of 45 degree.

8. easy to maintenance

Application:

Centrifugal mining slurry pump are widely used in mining, power, metallurgy, coal, deading, building material and other industrial lines to pump concentrate, tailings, sludge and other abrasive, high density slurries.
Minerals Flotation Processing
Electric Factory Coal Preparation
Coal Washing
Chemical Medium Processing
Effluent Handling
Sand And Gravel Handling

we also produce mechanical seals for pumps,welcome to contact us.

rubber impeller pumps manufacturers

rubber impeller pumps manufacturers Application:
HS(R) series slurry pump is widely used in metallurgy, mining, mineral processing, dredging, de-watering, water treatment, coal washing, mill, cyclone feed, tailing, power, building material...etc. various industrial sites. HS pumps are called different names for different working duties: Mineral processing pump, Mill discharge slurry Pump, Booster pump, Feeding pump, Tailing pump,Transfer pump Thickner Underflow Pump, De-watering screen pump, Pressure pump, Concentrate pump...

rubber impeller pumps manufacturers 

Features:
1.Replaceable wear-resistant metal or rubber liners and impellers, long service life time.
2. Easy to adjust the space between impeller and front liner and can be removed completely when maintaining.
3.Bearing assembly use grease lubrication.
4. Seal types: packing seal, expeller seal and mechanical seal.
5. Discharge direction can be installed at intervals of 45 degrees as request and oriented to any eight positions to suit applications.
6. Drive types: V belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices.
7. Wide application, good NPSH and high efficiency. The series pump can be installed in multistage to meet the delivery for long distance.

we produce  slurry pump parts,welcome to contact us.

submersible slurry pump spare parts

submersible slurry pump spare parts Descriptions:
Water Submersible Pump Impeller in Stainless Steel CD4/316/Titanium Alloy
Material:Stainless steel, carbon steel, titanium alloy, high chrome, cast iron, bronze, ductile iron, brass, etc.
Model Type:All kinds of model we can do according to your request
Type:ANSI pump components, Goulds 3196, Durco mark 3 pump parts, Impeller Titanium, Open Impeller, Semi Open, Machinery components and Mining Equipments.
Casting Method:lost wax casting
Process moulding
pouring
machining
testing
Annual Capacity The maximum production capacity could be 10, 000 tons per year, with a single piece up to 100 tons, the smallest part only a few grams by lost wax casting, the largest weight can be made up to 10t/pc.


We have  Model workshop, casting workshop, machining workshop, assembly workshop.
We undertake OEM order as customer's drawing
Our products are widely used in mining, metallurgy, coal washing, power plant, sewage water treatment, dredging, chemical and petroleum industries.
Main Pump Model : AH, HH M, L . SP , AF , ZG, ZGB , ZJ , G , WS , ZJQ and etc.
Main pump parts : Cover plate , Frame Plate,  Impeller, Pump Liner , Volute Liner , Throat Bush, Frame plate Liner Insert, Back Liner , Expeller, shaft , shaft sleeve, stuffing box,base, Bearing Assembly, Shaft Spacer, base,gland assembly, lantern restrictor and so on. 

we produce sump pump replacement parts,welcome to contact us.

slurry pump parts china

slurry pump parts china Materials Offered:

-High Chrome White Cast Iron
-Ductile Iron
-Stainless Steel
-Natural Rubber
-Specific Rubber
-Polyurethane
-Ceramic

The properties of the rubber material:

We have variety of natural rubber and elastomers, which can be used for pumping corrosive or acid slurries. But the rubber material is not suitable for slurries which contain sharp solids.
When the slurries contain fine particles, the rubber material features good performance of wear resistant.


The properties of the high chrome white iron:

We have variety of high chrome white iron, and the content of chrome is different.
They can offer excellent performance under erosive conditions. The alloy can be effectively used in a wide range of slurry types. The high wear resistance of alloy is provided by the presence of hard carbides within its microstructure. Some special high chrome alloy is also suited to application where corrosion resistance, as well as erosion resistance is required.

For more information about slurry pump rubber impeller,pls contact us.

replaceable slurry pump spare parts

replaceable slurry pump spare parts
1.5/1B-AH Slurry Pump code: B1127
2/1.5 B-AH Slurry Pump code: B15127
3/2 C-AH Slurry Pump code: C2147
4/3 C-AH Slurry Pump code: D3147
4/3 D-AH Slurry Pump code: D3147
6/4 D-AH Slurry Pump code: E4147
6/4 E-AH Slurry Pump code: E4147
8/6 E-AH Slurry Pump code: F6147
8/6 F-AH Slurry Pump code: F6147

replaceable slurry pump spare parts

10/8 F-AH Slurry Pump code: F8147
10/8 ST-AH Slurry Pump code: G8147
12/10 ST-AH Slurry Pump code: G10147
14/12 ST-AH Slurry Pump code: G12147

we are slurry pump parts suppliers,pls contact us.

submersible pump fittings

we produce submersible pump fittings,pls leave us messages.
Product Item:malleable iron pipe fitting: elbows, tees, sockets, bends, nipples, unions, crosses, flanges, plugs, backnuts, crosses over, round caps, etc.
Material:Malleable cast iron
Technics:Casting
Size:1/8"-6"
Edges:Banded, beaded or plain; with or without Ribs.
Thread Standard:BS ANSI & DIN
Finish:Black, Eclectic Galvanized, Hot Dipped Galvanized, all be antirust treatment
Shape:Equal, Reducing
Grades:Heavy series, Standard series, Medium series, Light series
Packaging:Cartons, woven bags, wooden boxes
Quality Control:Excellent material, precise angles, good antirust property
Product Usage:Suitable for joining pipe lines of team, gas, oil, air

we produce  sump pump replacement parts,pls leave us messages.

impeller pump suppliers in china

impeller pump suppliers in china
Pump Body: cast iron & support under special anti-rust treatment
Impeller: stainless steel impeller, brass impeller, ppo impeller
Mechnical Seal: carbon / ceramic / Stainless Steel

Motor
Bulit-in thermal protector for single phase motor
Motor with copper winding
Motor Housing: Steel-plate, Aluminum alloy
C&U bearing
AISI 304 shaft or 45# carbon steel

impeller pump suppliers in china

Working Range
Liquid: clean liquids without  suspended solids, non-aggressive
 Liquid temperature: -10ºC and +100ºC
 Ambient temperature up to +40ºC
Max. working pressure 10 bar
Continous service S1
 Insulation: B
Protection: IP44

Application
Household Water Supply
Water Supply System
Cooling System
Boost System

For more information about slurry pump parts,pls leave us messages.

sump pump replacement parts

sump pump replacement parts
Factory of slurry pump, sand gravel pump , dredging pump and OEM Service
 Feature:
1. centrifugal slurry pumps and spare parts can fully interchange with world famous brand.
2. These pumps are of heavy-duty construction, designed for continuous pumping of highly abrasive and corrosive slurries.
3. They feature a wide choice of replaceable abrasion resistant metal or moulded elastomer casting liners and Impellers, which are all interchangeable within a common casting assembly.

4. Wear -resistant Metal Liner and Rubber Liner available

5.Seal Type: gland Seal , Expeller Seal and Meachnical seal

6.Can be installed in multistage series

7. Can be positioned at intervals of 45 degree.

8. easy to maintenance

Application:

Centrifugal mining slurry pump are widely used in mining, power, metallurgy, coal, deading, building material and other industrial lines to pump concentrate, tailings, sludge and other abrasive, high density slurries.
Minerals Flotation Processing
Electric Factory Coal Preparation
Coal Washing
Chemical Medium Processing
Effluent Handling
Sand And Gravel Handling

we are pump spare parts manufacturer,you can contact us.

sump pump replacement parts

we have sump pump replacement parts,we can supply you.

Factory of slurry pump, sand gravel pump , dredging pump and OEM Service
 Feature:

1. centrifugal slurry pumps and spare parts can fully interchange with world famous brand.
2. These pumps are of heavy-duty construction, designed for continuous pumping of highly abrasive and corrosive slurries.
3. They feature a wide choice of replaceable abrasion resistant metal or moulded elastomer casting liners and Impellers, which are all interchangeable within a common casting assembly.

sump pump replacement parts

4. Wear -resistant Metal Liner and Rubber Liner available

5.Seal Type: gland Seal , Expeller Seal and Meachnical seal

6.Can be installed in multistage series

7. Can be positioned at intervals of 45 degree.

8. easy to maintenance

Application:

Centrifugal mining slurry pump are widely used in mining, power, metallurgy, coal, deading, building material and other industrial lines to pump concentrate, tailings, sludge and other abrasive, high density slurries.
Minerals Flotation Processing
Electric Factory Coal Preparation
Coal Washing
Chemical Medium Processing
Effluent Handling
Sand And Gravel Handling
if you looking for  slurry pump parts suppliers?here we can supply you.

sump pump replacement parts

Description of sump pump replacement parts
1. The slurry pump spare parts are made of high chromium alloy which has superior wear and corrosive resistance.
2. Non-Standard slurry pump spare parts & Different size available.

sump pump replacement parts   

Main applications of slurry pump spare parts
This kind of slurry pump spare parts are mainly used in for handling abrasive, high density slurries in the metallurgical, mining, coal, power, building material and other industrial departments.

looking for submersible slurry pump spare parts?here we can supply you.

slurry pump parts china

we produce slurry pump parts china,if you need our products,pls leave us messages.
Not only does MUYUAN offer the complete pumps, we also offer the spares for all series pumps, they include
-Impeller
-Metal Liner
-Rubber Liner
-Bearing Assembly
-Base
-Cover Plate & Frame Plate
-Others

The pump parts can be made of high chrome, a wide variety of elastomers or the latest in ceramic materials for longer service life and higher efficiency.
Materials Offered:
-High Chrome Cast Iron
-Ductile Iron
-Stainless Steel
-Natural Rubber
-Specific Rubber
-Polyurethane

For more information about Slurry Pump Rubber Impeller,you can contact us.

slurry pump parts

slurry pump parts 
High chrome pump  parts  : According to customer's drawings/sample
 High chrome pump parts   : Made by  sand casting
 High chrome pump parts material : Cr 20 ,Cr 26 ,Cr 28
 High chrome pump parts machining : CNC machining
 High chrome pump parts  : Can send the sample firstly for testing
 High chrome pump parts  weight :  can reach 5 tons
 High chrome pump parts : impeller ,casing ,etc

Product Description
We stock huge quantity of spare parts of slurry pump to make sure fast delivery and to meet urgent needs from our clients. OEM pump part is welcome.
Material options:
-High Chrome alloy
-Grey Iron
-Cast Iron
-Rubber
-Polyurethane

-OEM Pump Parts:
Metal impeller is made of high chrome alloy, SA05,SA49, anti-abrasive, SA33 anti-corrosive
Rubber impeller is made of SR26,SR55, SR33
Polyurethane material is available.

Brief introduction:

-Spare parts in anti-abrasion high chrome cast iron alloy.
-Largest weight of single workpiece can be 13t.
-Largest outside diameter of workpiece can be 5m
-Manufacture other mechanical parts according to your drawing.

About sump pump parts and accessories,we can help you.

sump pump replacement parts for sale

sump pump replacement parts for sale
High effiency anti-abbrasive slurry pump spare parts
Brief introductions
Shijiazhuang Boda Industrial Pump Co., Ltd. Is the specialized manufactuer of slurry pumps in Shijiazhuang, China. Our products cover Slurry pump, Sand/Gravel pump, vertical slurry pump, froth pump and slurry pump spare parts.

Description of products
1. The slurry pump spare parts are made of high chromium alloy which has superior wear and corrosive resistance.
2. Non-Standard slurry pump spare parts & Different size available.

Main applications of slurry pump spare parts
This kind of slurry pump spare parts are mainly used in for handling abrasive, high density slurries in the metallurgical, mining, coal, power, building material and other industrial departments.

we produce replaceable slurry pump spare parts,if you need our produce ,pls leave us messages.

slurry pump parts china

slurry pump parts china
Not only does MUYUAN offer the complete pumps, we also offer the spares for all series pumps, they include

-Impeller
-Metal Liner
-Rubber Liner
-Bearing Assembly
-Base
-Cover Plate & Frame Plate
-Others

slurry pump parts china   

The pump parts can be made of high chrome, a wide variety of elastomers or the latest in ceramic materials for longer service life and higher efficiency.

Materials Offered:
-High Chrome Cast Iron
-Ductile Iron
-Stainless Steel
-Natural Rubber
-Specific Rubber
-Polyurethane

we are pump spare parts manufacturer,welcome to contact us.

Slurry Pump Rubber Impeller from china

Slurry Pump Rubber Impeller Specifications
Slurry pump impeller - high anti-abrosive can be supply with huge amount within a short period
Slurry pump impeller
We proudly manufacture quality pumps whose parts are 100% interchangeable with most pump in international market. This means no more inventory hassles when you decide to use another pump supplier.

Our spares are fully interchangeable with famous slurry pump brand in the world, for both herizontal slurry pump and vertical pump.

Slurry Pump Rubber Impeller

Feature of our impeller:

Front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are completely interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.

we produce sump pump replacement parts,if you need our products,pls leave us messages.

Slurry Pump Rubber Impeller

buy Slurry Pump Rubber Impeller?here we can supply you.
Natural rubber material, mud pump liner, wear resistance, anti-aging, good wear resistance, good tear resistance, stable performance, anti-aging.
The company is located in:
The company is located in:
The company is located in:
Rubber-lined mud pump parts are fully interchangeable with metal lining to accommodate aggressive mud
The company is located in:
Mainly used in metal and non-metallic mining, cement, heavy medium coal preparation, power and other industrial and mining enterprises, is the core component of slurry pump feed suspended particles, the product structure, long life, high efficiency, design load, low energy consumption , Smooth operation, easy installation and maintenance.

want to buy slurry pump parts?we can help you.

sump pump replacement parts

sump pump replacement parts Feature:
1. centrifugal slurry pumps and spare parts can fully interchange with world famous brand.
2. These pumps are of heavy-duty construction, designed for continuous pumping of highly abrasive and corrosive slurries.
3. They feature a wide choice of replaceable abrasion resistant metal or moulded elastomer casting liners and Impellers, which are all interchangeable within a common casting assembly.

4. Wear -resistant Metal Liner and Rubber Liner available

5.Seal Type: gland Seal , Expeller Seal and Meachnical seal

6.Can be installed in multistage series

7. Can be positioned at intervals of 45 degree.

8. easy to maintenance

Application:

Centrifugal mining slurry pump are widely used in mining, power, metallurgy, coal, deading, building material and other industrial lines to pump concentrate, tailings, sludge and other abrasive, high density slurries.
Minerals Flotation Processing
Electric Factory Coal Preparation
Coal Washing
Chemical Medium Processing
Effluent Handling
Sand And Gravel Handling

For more information about slurry pump parts suppliers,pls email us.

sump pump replacement parts

sump pump replacement parts Feature:
1. centrifugal slurry pumps and spare parts can fully interchange with world famous brand.
2. These pumps are of heavy-duty construction, designed for continuous pumping of highly abrasive and corrosive slurries.
3. They feature a wide choice of replaceable abrasion resistant metal or moulded elastomer casting liners and Impellers, which are all interchangeable within a common casting assembly.

4. Wear -resistant Metal Liner and Rubber Liner available

5.Seal Type: gland Seal , Expeller Seal and Meachnical seal

6.Can be installed in multistage series

7. Can be positioned at intervals of 45 degree.

8. easy to maintenance

sump pump replacement parts 

Application:

Centrifugal mining slurry pump are widely used in mining, power, metallurgy, coal, deading, building material and other industrial lines to pump concentrate, tailings, sludge and other abrasive, high density slurries.
Minerals Flotation Processing
Electric Factory Coal Preparation
Coal Washing
Chemical Medium Processing
Effluent Handling
Sand And Gravel Handling

we produce Slurry Pump Rubber Impeller,welcome to contact us.

pump spare parts manufacturer

we are pump spare parts manufacturer
1. Best qualtiy ( OEM and Timeway can choose).
2. Most in stock.
3. Competitive price
4. Any details of the part(size,dimension and model), we can confirm for you soon.
5. Please confirm the model of the Charge pump.

Packaging & Shipping
1. Packing: In the Carton box.
2. Shipping: delivery by DHL/FEDEX/EMS.
3. For Russian clients: we have long term cooperated shipper, you never need worry about custom clearance.

NO.	DESCRIPTION	QUANTITY/SET
1	CYLINDER BLOCK	1
2	VALVE PLATE	1
3	PISTON	9
4	RETAINER PLATE	1
5	BALL GUIDE	1
6	DRIVE SHAFT	1
7	SWASH PLATE	1
8	SADDLE BEARING	2
9	BEARING SEAT	2
10	PRESS PIN	3

slurry pump parts suppliers

we are slurry pump parts suppliers,welcome to contact us.
The pump parts can be made of high chrome, a wide variety of elastomers or the latest in ceramic materials for longer service life and higher efficiency.

Materials Offered:

-High Chrome Cast Iron
-Ductile Iron
-Stainless Steel
-Natural Rubber
-Specific Rubber
-Polyurethane

slurry pump parts suppliers

Material options:
-High Chrome alloy
-Grey Iron
-Cast Iron
-Rubber
-Polyurethane

-OEM Pump Parts:
Metal impeller is made of high chrome alloy, SA05,SA49, anti-abrasive, SA33 anti-corrosive
Rubber impeller is made of SR26,SR55, SR33
Polyurethane material is available.

buy submersible pump fittings,you also can contact us .

pump spare parts manufacturer from china

pump spare parts manufacturer from china

With a strict quality management system, advanced technical procedures, professional engineers and excellent after-sale services, we keep exporting the products to Europe, America, Australia, the Middle East, Asia and Africa, and win much praise and fame from the customers.

Most of our products are jointly designed and developed with our foreign customers, so they are completely interchangeable with the famous brand, such as Bosh Rexroth, Vickers, Commercial, Sauer, Komatsu, Yuken, Tokimec, Caterpillar, SAI, Danfoss and Staffa etc.

pump spare parts manufacturer from china

With competitive price, good quality, best service and prompt delivery, we sincerely welcome the opportunity to establish firmly co-operative relationships with customers in the near future.

For more information about slurry pump parts suppliers,we can help you.

rubber pump parts suppliers china

rubber pump parts suppliers china Description
We stock huge quantity of spare parts of slurry pump to make sure fast delivery and to meet urgent needs from our clients. OEM pump part is welcome.
Material options:
-High Chrome alloy
-Grey Iron
-Cast Iron
-Rubber
-Polyurethane

-OEM Pump Parts:
Metal impeller is made of high chrome alloy, SA05,SA49, anti-abrasive, SA33 anti-corrosive
Rubber impeller is made of SR26,SR55, SR33
Polyurethane material is available.

rubber pump parts suppliers china

Brief introduction:

-Spare parts in anti-abrasion high chrome cast iron alloy.
-Largest weight of single workpiece can be 13t.
-Largest outside diameter of workpiece can be 5m
-Manufacture other mechanical parts according to your drawing.

For more information about slurry pump factory,pls visit

slurry pump parts in china

 Description of slurry pump parts
1. The slurry pump spare parts are made of high chromium alloy which has superior wear and corrosive resistance.
2. Non-Standard slurry pump spare parts & Different size available.

Main applications of slurry pump spare parts
This kind of slurry pump spare parts are mainly used in for handling abrasive, high density slurries in the metallurgical, mining, coal, power, building material and other industrial departments.

Welcome to contact us for more impellers details and free quote.

slurry pump parts in china

-OEM Pump Parts:
Metal impeller is made of high chrome alloy, SA05,SA49, anti-abrasive, SA33 anti-corrosive
Rubber impeller is made of SR26,SR55, SR33
Polyurethane material is available.

We have variety of natural rubber and elastomers, which can be used for pumping corrosive or acid slurries. But the rubber material is not suitable for slurries which contain sharp solids.
When the slurries contain fine particles, the rubber material features good performance of wear resistant.

For more information about Slurry Pump Rubber Impeller,pls contact us.

slurry pump parts from china